User Tools

Site Tools


howtos:model_loading

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
howtos:model_loading [2010/01/22 20:46]
deryn.crockett
howtos:model_loading [2011/02/18 20:36] (current)
deryn.crockett
Line 37: Line 37:
     -Choose menu item FW Actions > Load OR right click and select Load (note the location is what you set in step 4)     -Choose menu item FW Actions > Load OR right click and select Load (note the location is what you set in step 4)
     -MB name: MUST be the model base name from the root of the simulation diagram, give it the description “sim”     -MB name: MUST be the model base name from the root of the simulation diagram, give it the description “sim”
-    -Adjust your default file path to the cal location (e.g. /​models/​tcteem/​V5/​cal) +    -Click OK to load the simulation framework 
-    -Repeat loading framework for cal BUT choose the check button to say it is a calibration framework, use the MB name from the calibration diagram, and enter "​cal"​ as the description+    -Choose menu item File > Set File Path... and direct it to the location ​of the calibrator files (e.g. /​models/​tcteem/​V5/​cal) 
 +    -Choose menu item FW Actions > Load OR right click and select Load again 
 +    -Enter ​the MB name from the calibration diagram, and enter "​cal"​ as the description 
 +    -Activate the calibration framework check box 
 +    -Click OK to load the calibration framework
   -Load informants   -Load informants
     -Choose menu item Windows > Informants     -Choose menu item Windows > Informants
-    -Right click and select Load (path should be correct because of 5c) +    -Choose menu item Informant Actions > Load OR right click in Informants window ​and select Load 
-    -Adjust ​the file location ​if it is incorrect ​(should ​be something like /​models/​tcteem/​V5/​cal/​informs.samm)+    -Ensure ​the file path points to the cal location (the path should ​read something like /​models/​tcteem/​V5/​cal/​informs.samm) 
 +    -Click OK to load the informants 
  
 ===== Run Calibration to Produce a History ===== ===== Run Calibration to Produce a History =====
howtos/model_loading.1264193179.txt.gz · Last modified: 2010/01/22 20:46 by deryn.crockett