whatIf? Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Overview of reading data ======

===== Framing the problem =====

On the face of it, reading (or importing) data into a model is straightforward.  An input target object is filled with data from one or more source files (Figure 1). 

{{:howtos:workwithdata:import_process_1.png|Figure 1}} \\
**Figure 1 - Import process**

However, in practice there are complicating factors such as:
  * The sets ((The term //set// is used here for simplicity. The term //informant// in whatIf terminology is the most general description for that which defines a classifying dimension for one or more objects. A //set// is a type of informant - there are also //sequence// and //category// -type informants. //Category// in its narrow whatIf context - the definition of permissible combinations of multiple informants - should not be confused with its broader meaning of classifying entity, similar to an //element// within a //set//.)) which define the input object data are labeled and/or ordered differently from those of the source files.
  * The source and object sets are fundamentally different - therefore the source data require aggregation or splitting (generically called //mapping//).
  * A dimension of the target object - say for example, a time dimension - may span multiple source files, requiring time-series assembly. Furthermore, there maybe temporal gaps requiring interpolation or projection.
  * Multi-dimensionality can cause the internal structure of the source file(s) to be complex, or the number of source files to proliferate.

Therefore, some data processing is required to bridge the gap between the source data and the target object. This can be accomplished in a number of ways - one approach is shown in Figure 2. Here the source files are assembled and processed through a script (or //view//, in whatIf terminology) written in TOOL.

{{:howtos:workwithdata:import_process_2.png|Figure 2}} \\
**Figure 2 - Importing and processing source data with a view**

Embedding a large amount of processing logic in a view - as opposed to a framework diagram - has drawbacks, one being reduced transparency. To mitigate this the diagram structure can be "grown" further back to "meet" the source data as exemplified in Figure 3. Note that import views ((Although multiple view arrows are shown, in practice the import procedures are likely to be condensed into a single view)) are still required but compared to the implied view logic of Figure 2, the views in Figure 3 are oriented more towards simply importing and less towards processing.

{{:howtos:workwithdata:import_process_3.png|}} \\
**Figure 3 - Importing source data with views; processing with diagram model structure**

In some special cases, additional pre-processing is performed using another language or tool (e.g. awk, PERL, R). Or, if the pre-processing task is sufficiently large and complex, a separate whatIf model framework might be developed (often called a //database// model).

The problem described here is encountered at several points within the broader model development cycle - most intensively in the data assembly and calibration stage, involving historical data - but also during scenario creation with external forecasts and projections. The target objects are defined during the initial model design stage.

===== Import "channels" =====

Marcus to flesh out this and the section below. FIXME

  * stand alone TOOL scripts
  * reading data through Documenter for interactive/prototyping/testing
  * create views in SAMM (import views)

Most of the articles in this section  are oriented towards ultimately getting data into diagram-based objects loaded in SAMM.

Point out some of the differences between the channels (e.g. stand-alone scripts don't have arrays of tool objects, indexes, etc; availability of informants)

===== Considerations and best practices =====

  * Do as little "touching" to the source data files as possible - preferbly none. This helps repeatabiliy and the audit trail back to source data.
  * Document source data origins in the diagram (variable description and notes fields).
  * Name time dimensions explicitly.
    * convention for index naming (e.g. t2010_2015)
    * name time informants with data source in name (e.g. cs_t19762006)
  * Import into objects (either diagram or view locals) in their native units of measure - i.e. no magic number conversion hacks. Let TOOL's built-in unit handling and conversion do all the work.
  * Where possible use //coordinate// data format. Explain why. Provide link. FIXME.
  * Describe other considerations for view vs. "growing" diagram logic vs. stand-along TOOL script pre-processor vs. database.
whatIf? Wiki

User Tools

Site Tools

Page Tools
