This is an old revision of the document!
Modelbase Name | View Description | Comments |
---|---|---|
Action Views | ||
newResBldgThermal | Action - New residential thermal demand | Introduce new building code energy use improvements in residential buildings |
view options | ||
How would you like to specify electricity savings per building? | 1) passive house standard (15 kWh / yr) 2) 2) percent improvement per five years |
|
Table: Please enter 1 for each dwelling type to which building code applies | ||
Table: Please enter annual uptake rate for each year | ||
newNonResBldgThermal | Action - New commercial thermal demand | Introduce new building code energy use improvements in non-residential buildings |
dwellRetrofit | Action - Retrofit homes | Introduce energy use improvements in existing residential buildings |
view options | ||
Table: Please enter 1 for each dwelling type to be retrofitted | ||
Table: Please enter 1 for each year built to be retrofitted | ||
How would you like to specify the number of buildings to be retrofitted? | 1) Specify fraction of buildings per year through a table 2) Retrofit rate increases exponentially until all historical stock is retrofitted |
|
Please enter the year in which retrofits will begin | default = 2018 | |
Please enter the year in which retrofits will stop | default = 2050 | |
Please enter percent of available buildings to be retrofitted by end year | default = 100% | |
How would you like to specify electricity savings per building? | 1) specify electricity savings in absolute units (kWh / yr) 2) specify electricity savings as percent |
|
Please enter the target annual electricity percent savings per building (%) | default = 7 | |
Please enter the target percent reduction in thermal demand per building (%) | default = 8 | |
nonResRetrofit | Action - Retrofits ICI sector | Introduce energy use improvements in existing non-residential buildings |
view options | ||
Table: Please enter 1 for each building type to be retrofitted | ||
How would you like to specify the amount to be retrofitted? | 1) fraction of buildings 2) Retrofit rate increases exponentially until all historical stock is retrofitted |
|
How would you like to specify electricity savings per building? | 1) specify electricity savings in absolute units (kWh / yr) 2) specify electricity savings as percent |
|
Please enter the target annual electricity percent savings per building (%) | default = 7 | |
Please enter the target percent reduction in thermal demand per building (%) | default = 8 | |
adjIndSecEfficiencyByFuel | Action - Industrial efficiency | Improve industrial fuel use efficiency |
view options | ||
How would you like to specify industrial efficiency? | 1) Efficiency gains by fuel type 2) Efficiency gains by end use |
|
Table: Please enter the efficiency improvement percent (%) | ||
PVforNetZero | Action - PV ground mount | Add solar power capacity to community |
view options | ||
Table: Please enter MW of PV generation in the zones required | ||
addDecWind | Action - Wind power | Add wind power capacity to community |
view options | ||
Table: Please enter MW of wind generation in the zones required | ||
Model-Wide Summaries | ||
emissionsRpt | report emissions at various aggregations | View projected emissions in different formats with user-specified sector and fuel categorizations |
view options | ||
How do you want to interact with the view? | 1) No questions just take all defaults 2) Run interactively asking questions |
|
What end year would you like to terminate the display at? | default = 2051 | |
Do you wish to exclude emissions from biogenic sources? [y] | default = y | |
Do you want to roll up the GHG emissions types? (y/n) | default = y | |
What units do you want to use? | 1) tonne 2) kilotonne 3) megatonne |
|
Which result do you you want to see? | 1) energy high level aggregation 2) fully disaggregated 3) energy custom 4) none - quit Custom mappings are stored under /models/cityInSight/V1/[city name]/viewData/reportingAggMaps/mapToAggEm.csv |
|
If energy custom aggregation chosen: Which fuel types have special mappings? | 1) Diesel (incl bio) 2) Motor gas (incl ethonol) 3) None (default) Special fuel type mappings are stored under /models/cityInSight/V1/[city name]/viewData/reportingAggMaps/mapToAgg_[diesel or mogas].csv |
|
How do you wish to handle fuel types? | 1) Roll fuel types together 2) Report fuel types separately 3) Report fuel types as custom aggregation Custom mappings are stored under /models/cityInSight/V1/[city name]/viewData/reportingAggMaps/fuelTypeMap.csv |
|
How do you want to view the data? | 1) Report data using Graph (default) 2) Report data using Table 3) Export Data to .csv If more than one option is selected, reports will appear in sequence |
|
energyRpt | View projected energy use in different formats with user-specified sector, fuel, and end use categorizations | |
view options | ||
How do you want to interact with the view? | 1) No questions just take all defaults 2) Run interactively asking questions |
|
What end year would you like to terminate the display at? (2011..2061) | default = 2051 | |
Which result do you you want to see? | 1) energy high level aggregation 2) fully disaggregated 3) energy custom with end uses 4) energy custom without end uses 5) none - quit Custom mappings are stored under /models/cityInSight/V1/viewData/reportingAggMaps/mapToAgg.csv Custom end use mappings are stored under /models/cityInSight/V1/viewData/reportingAggMaps/endUseMap.csv |
|
If energy custom aggregation chosen: Which fuel types have special mappings? | 1) Diesel (incl bio) 2) Motor gas (incl ethonol) 3) None (default) Special fuel type mappings are stored under /models/cityInSight/V1/viewData/reportingAggMaps/mapToAgg_[diesel or mogas].csv |
|
How do you wish to handle fuel types? | 1) Roll fuel types together 2) Report fuel types separately 3) Report fuel types as custom aggregation Custom mappings are stored under /models/cityInSight/V1/viewData/reportingAggMaps/fuelTypeMap.csv |
|
How do you want to view the data? | 1) Report data using Graph (default) 2) Report data using Table 3) Export Data to .csv If more than one option is selected, reports will appear in sequence |
|
What units do you want to use to display the data? | 1) PJ - petajoule 2) GJ - gigajoule |
|
analysisEnergyUse | Analysis - energy use | Various reports of energy use |
2) energy maps | ||
1) stationary energy use (TJ) | Zonal map of total stationary energy use by sector (total, residential, non-residential) from 2011 to 2050 | |
2) stationary energy gross density (GJ / hectare) | Zonal map of total stationary energy density by sector (total, residential, non-residential) from 2011 to 2050 | |
9) stationary energy intensity (MJ / sqm) | Zonal map of stationary energy intensity by sector (total, residential, non-residential) from 2011 to 2051 | |
End use sectors | ||
analysisBuildings | Maps of building-related state and growth | |
view options | ||
1) geomap residential building density | Choropleth maps of dwelling unit densities. Total (state) and accumulated new. Single-scenario support only. |
|
2) geomap non residential floorspace density | Choropleth maps of non-residential floorspace densities. Total (state) and accumulated new. Single-scenario support only. |
|
bldgsByYearblt | Analysis - buildings by year built | Provides a breakdown of the number of buildings, dwelling units, and floorspace by zone, type, and year built in a series of tables. |
analysisPopEmp | Analysis - population and employment | Choropleth maps of: - population density - employment density - combined population and employment density |
analysisTrans | Various passenger transportation results and statistics | |
view options | ||
2) personal transportation summary | Displays graphs and then tables of: - Daily person trips - Mode Share - Average vehicle trip length by purpose - Average vehicle trip length - Annual passenger VKT by purpose geographic (75% ext) - Annual passenger VKT by purpose induced (50% ext) - Average annual passenger VKT per resident vehicle |
|
3) geomap mode shares | Choropleth maps of mode share of trip ends. Internal trips only. Single-scenario support only. |
|
5) geomap passenger VKT | Choropleth maps of: - home-based VKT by zone from - home-based VKT per capita by zone from. Internal trips only. Single-scenario support only. |