whatIf? Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Key CityInSight Views ======

 
| **Action Views** ||
| Action - New residential thermal demand | Introduce new building code energy use improvements in residential buildings ||
|:::| //**view options**// |
|:::| How would you like to specify electricity savings per building? | **1) passive house standard (15 kWh / yr)** \\ 2) 2) percent improvement per five years |
|:::| Table: Please enter 1 for each dwelling type to which building code applies ||
|:::| Table: Please enter annual uptake rate for each year ||
| Action - New commercial thermal demand | Introduce new building code energy use improvements in non-residential buildings ||
|:::| //**view options**// |
|:::| How would you like to specify electricity savings per building? | **1) passive house standard (15 kWh / yr)** \\ 2) 2) percent improvement per five years |
|:::| Table: Please enter 1 for each building type to be retrofitted||
|:::| Table: Please enter annual uptake rate for each year ||
| Action - Retrofit homes | Introduce energy use improvements in existing residential buildings ||
|:::| //**view options**// |
|:::| Table: Please enter 1 for each dwelling type to be retrofitted ||
|:::| Table: Please enter 1 for each year built to be retrofitted ||
|:::| How would you like to specify the number of buildings to be retrofitted? | 1) Specify fraction of buildings per year through a table \\ **2) Retrofit rate increases exponentially until all historical stock is retrofitted** |
|:::| Please enter the year in which retrofits will begin | default = 2018 |
|:::| Please enter the year in which retrofits will stop | default = 2050 |
|:::| Please enter percent of available buildings to be retrofitted by end year | default = 100% |
|:::| How would you like to specify electricity savings per building? | 1) specify electricity savings in absolute units (kWh / yr) \\ **2) specify electricity savings as percent** |
|:::| Please enter the target annual electricity percent savings per building (%) | default = 7 |
|:::| Please enter the target percent reduction in thermal demand per building (%) | default = 8 |
| Action - Retrofits ICI sector | Introduce energy use improvements in existing non-residential buildings ||
|:::| //**view options**// |
|:::| Table: Please enter 1 for each building type to be retrofitted ||
|:::| How would you like to specify the amount to be retrofitted? | 1) fraction of buildings \\ **2) Retrofit rate increases exponentially until all historical stock is retrofitted** |
|:::| How would you like to specify electricity savings per building? | 1) specify electricity savings in absolute units (kWh / yr) \\ **2) specify electricity savings as percent** |
|:::| Please enter the target annual electricity percent savings per building (%) | default = 7 |
|:::| Please enter the target percent reduction in thermal demand per building (%) | default = 8 |
| Action - Industrial efficiency | Improve industrial fuel use efficiency ||
|:::| //**view options**// |
|:::| How would you like to specify industrial efficiency? | 1) Efficiency gains by fuel type \\ **2) Efficiency gains by end use** |
|:::| Table: Please enter the efficiency improvement percent (%) ||
| Action - PV ground mount | Add solar power capacity to community | |
|:::| //**view options**// |
|:::| Table: Please enter MW of PV generation in the zones required ||
| Action - Wind power | Add wind power capacity to community ||
|:::| //**view options**// |
|:::| Table: Please enter MW of wind generation in the zones required ||
| **Model-Wide Summaries** ||
| Report Emissions | Report emissions for each sector and fuel type. Total emissions are reported in relation to an 80% by 2050 emissions reductions target. ||
| Report Energy | Report energy use for each sector and fuel type. Includes demand side local energy production fuel use. ||
| **End use sectors** ||
| Analysis - Buildings | Choropleth maps of building-related state and growth ||
|:::| //**view options**// |
|:::| 1) geomap residential building density | Choropleth maps of dwelling unit densities. Total (state) and accumulated new. \\ Single-scenario support only. |
|:::| 2) geomap non residential floorspace density | Choropleth maps of non-residential floorspace densities. Total (state) and accumulated new. \\ Single-scenario support only. |
| bldgsByYearblt | Analysis - buildings by year built | Provides a breakdown of the number of buildings, dwelling units, and floorspace by zone, type, and year built in a series of tables. |
| analysisPopEmp | Analysis - population and employment |Choropleth maps of: \\ - population density \\ - employment density \\ - combined population and employment density |
| analysisTrans | Various passenger transportation results and statistics |
|:::| //**view options**// |
|:::| 2) personal transportation summary | Displays graphs and then tables of: \\ - Daily person trips \\ - Mode Share \\ - Average vehicle trip length by purpose \\ - Average vehicle trip length \\ - Annual passenger VKT by purpose geographic (75% ext) \\ - Annual passenger VKT by purpose induced (50% ext) \\ - Average annual passenger VKT per resident vehicle |
|:::| 3) geomap mode shares | Choropleth maps of mode share of trip ends. Internal trips only. \\ Single-scenario support only. |
|:::| 5) geomap passenger VKT | Choropleth maps of: \\ - home-based VKT by zone from \\ - home-based VKT per capita by zone from. \\ Internal trips only. \\ Single-scenario support only. |

/*
| transSecEnrUseRpt| Analysis - transportation fuel use and stock report | FIXME Marcus to put in steps for stock report |
*/
whatIf? Wiki

User Tools

Site Tools

Page Tools
