User Tools

Site Tools


tutorials:tool_quick_reference_card

TOOL Quick Reference Card

A “cheat sheet” of commonly used tools, control structures and their syntax.

TOOL lines beginning with the '!' character are considered comments and will be ignored by the interpreter.

Tools and examples

A

avg() syntax and example:

A[s1,..,sn,t1,..,tm] = avg (B[s1,..,sn,k,t1,..,tm]; {dim=Name(k)},
{inlcudeZero={on,off}},{weight=W[s1,..,sn,k,t1,..,tm]})

E

extend() syntax and example:

A[..,Y,..] = extend (B[..,X,..]; dim=name, {start=s} {,end=e})
A[s,t] = extend (B[s,t]; dim=time, end=1998)

L

linint() syntax:

A[..S] = linint(B[..S];{start={on,off}}, {end={on,off}}, {fixedStart={on,off}}, {fixedEnd={on,off}})

M

map() example:

A[x] = map (B[y], yTox[x,y])

where map can be created:

map1[x,y] = create (; dim=x, dim=y, format=mapping, y1->x1,..,yi->xi,...)
map2[x,y] = import (; dataFormat=mapping, y1->x1,..,yi->xi,...)

Note the syntax for one-to-many:

map1[x,y] = create (; dim=x, dim=y, format=mapping, \
  y1->"x1,x2,x3", ..,yi->xi,...)

There is also a dimension mapping:

A[I1,.., In, X,K1,..,Km] = map (B[I1,.., In, Y,K1,..,Km]; Y->X)

which matches up element names in Y with those in X.

Mapping Template

N

norm() examples:

a[x,y,t] = norm (b[x,y,t]; dim=x)
a[x,y,t] = norm (b[x,y,t]; dim1=x,dim2=y)
a[x,y,t] = norm (b[x,y,t]; dim=all)
a[k->j,t] = norm (b[k->j,t]; dim=Name(k->j)@Name(k))

S

sum() examples:

a[t] = sum (b[t,a]; dim=age)
a[t] = sum (b[s,t,a]; dim1=sex, dim2=age)
a[s,t] = sum (b[s->c,t]; dim=stateCOcounty@state)
a[] = sum (b[s,a]; dim=all)

shrink() examples:

a[t] = shrink (b[byrs,a])
a[t] = shrink (b[byrs,a]; time)

glue() syntax and example: FIXME

TOOL commands

TOOL comments are lines beginning with the '!' character and will be ignored.

Goto functionality via skipto command:

skipto label1
	...
	skipped code
	...
label1:

Navigation and display: where(), moveto(“pathName”), up(), look(), showenv()

buildstring() syntax:

buildstring ($var, string1, string2, ...)

listen() example 1 (for a value to put into a TOOL object):

string $target	
say ("")
listen ("What do you want for the 2031 total dwelling unit target? {0..}[340500] ",$target)
if $target == ""
	$target = "340500"
	target[] = create (; entity=dwellUnit, data=$target)
else
	target[] = create (; entity=dwellUnit, data=$target)
endif

Example 2 (for TOOL integer type variable):

integer $elec_startYear
say ("")
listen ("  What is your elec start year? {2007..2090}[2010] ",$elec_startYear)
if $elec_startYear == 0
	$elec_startYear = 2010
endif

Example 3 (for a yes/no question):

boolean $answer
say ("")
listen ("Do you want to do something? {y n}[n] ",$answer)
if $answer== true
	say ("Do stuff here")
endif

menu() syntax:

menu (prompt, numItems, {item1, ..., itemN},{$items[]}, $choices[]
{defaultChoice=itemNumber}, {oneChoice={on,off}})

Example1: using variable strings, defaults and one choice only paramters

integer $numChoices = 3
boolean $choices[$numChoices]
string $choiceStrs[$numChoices]

$choiceStrs[1] = "ON Ministry of Finance - low scenario"
$choiceStrs[2] = "ON Ministry of Finance - reference scenario"
$choiceStrs[3] = "ON Ministry of Finance - high scenario"

menu ("Which result do you you want to see?  ", $numChoices, \
	$choiceStrs[], $choices[]; defaultChoice=1, oneChoice=true)

if ($choices[1] == true) 
	say ($choiceStrs[1])
  ...
endif 
if ($choices[2] == true) 
	say ($choiceStrs[2])
  ...
endif
if ($choices[3] == true) 
	say ($choiceStrs[3])
  ...
endif

If-Else syntax:

if arithmeticExpression

{else}

endif

For loop syntax:

for $controlVar from start {upto, downto} end {by step}
...
endfor

while-loop syntax:

while arithmeticExpression
...
endwhile

Boolean operators: >, <, >=, , ==, !=, AND, OR

Object Creation and Shaping

create() syntax:

A[X1,..,Xn] = create (; {object=array},
dim=dimString(X1), ...,dimString=Name(Xn),
{dimFromi=D[..]},{SIuom=uomStr,{metre=ni, m=ni},
{kilogram=ni, kg=ni},{second=ni, sec=ni, s=ni},{degreeC=ni, degC=ni},
{coloumb=ni, q=ni},{radian=ni, rad=ni},{steradian=ni, sterad=ni}},
{altUom=altUomStr}, {entity=entStr},
{SIuomFrom=S[..]}, {altUomFrom=T[..]}, {entityFrom=E[..]},
{dataType={real, integer}},{desc=descrStr},
{format={agg,coord,record,mdi}, useIndex={on,off},
{translate1=string1, .., translaten=stringn,..,value1=number1,..,valuen=numbern,
{ mask1=maskName1[X1,..,Xn]},..{maskn=maskNamen[X1,..,Xn],..}}
...,format dependent parameters...)

Examples:

Create link to import examples FIXME

labourRate[s,t] = create (; dim=sex, dim=SEQ;time:1992:1994:1;year, \
entity="(person*year)/auto", rowTitles=on, dataFile=labour.txt)

changeshape() syntax:

A[..,Y,..] = changeshape (B[..,X,..]; {Name (X)->newDim, DimNum (X)->newDim}, {reduceEnt}, {entity=ent}, \
  {altUom=auom}, {entityFrom=C[..]}, {SIuomFrom=D[..]}, {altUomFrom=E[..]}, {desc=str},{addDimn=dimName}, \
  {addDimnFromm=Z[..]}, {deleteDims:DimName (X),..}, {CheckShape=off})

Examples:

A[s,thwb] = changeshape (B[a,s,th]; time->SEQ;time:1991:2006:1;year, deleteDims:age)

copyshape() syntax:

A[..] = copyshape (B[..])

changeseq() syntax:

A[..,Y,..] = changeseq (B[..,X,..]; dim=X, {name=c}, {interval=i},{start=b}, {end=e}, {step=s},{shift=n})

reorder() example:

popx[s,a,t] = reorder (pop[s,t,a]; sex, age, time)

seeshape() syntax:

seeshape (A1[],..,An[])

Defining Sequences; Extracting and Inserting

A sequence is defined by the string: SEQ;name:start:end:step;stepInterval
For example:

x[t] = create (; dim=SEQ;time:1986:2006:1;year)

Examples of extract(), selection ranges from sequences.

A[s,t] = extract (B[s,t]; time:1993..1994)
A[s,t] = extract (B[s,t]; time:+1..+2)
A[s,t] = extract (B[s,t]; 2:1993..1994)
A[s,t] = extract (B[s,t]; 2:+1..+2)
A[s,t] = extract (B[s,t]; 2:+1..-2)
A[s,t] = extract (B[s,t]; time:1991..2006@5)

Non-sequence extraction:

A[s,tmp] = extract (B[s,t]; time:"1993,1995")
A[s,t] = extract (B[s,t]; time:+1,+3)
A[s,t] = extract (B[s,t]; time:"1987,1991..1998,2003")

Set from a set:

A[cp,t] = extract (B[c,t]; cities:"NY,Toronto")
A[cp,t] = extract (B[c,t]; time:+1,+2)

Multi-dimensional extraction with shrink:

A[t] = extract (B[s,t]; sex:male, time:1993..1994, shrink=on)

insert() examples

popx[t] = insert (popy[tc]; time->time:+0@5)
A[s,t] = insert (B[t]; sex:male)

Sets

crop[] = create (; object=set, data="wheat corn barley")

Or using a file

crop[] = create (; object=set, dataFile=crop.txt)

where 'crop.txt' is a file containing:

! the set 'crop'
wheat "wheat seed crop"
corn "corn seed crop"
barley "barley seed crop"

Categories

Syntax of category creation:

A[] = create (;object=category, groups=X, members=Y, dataFile=fileName,{desc=descrStr})

where the category definition file syntax is groupElemString : memberElemString or memberElemString. For example:

! munWard category elements
downtown : hamlet
othello
east : romeo
west : juliet
west : falstaff
kingLear

Or creation with category definition using parameters:

localinformant vwcCOvpshd[] = create (; object=category, groups=vehWeightClass, members=vehPowerSrcHD, \
	4_5andUnder="ICE_Gas ICE_Diesel ICE_NGL", \
	4_5-14_9="ICE_Gas ICE_Diesel", \
	15andOver="ICE_Diesel")

mapcat() syntax:

A[..,cs,es,..] = mapcat (B[..,cs->es,..]; dim=csCOes)
A[..,cs->es] = mapcat (B[..,cs,es,..]; category=csCOes)
A[..,cs->es] = mapcat (B[..,cs,..]; category=csCOes)
A[..,cs->es] = mapcat (B[..,es,..]; category=csCOes)

Category sum() syntax:

A[s1,..,sn,k,t1,..,tm] = sum (B[s1,..,sn,k->j,t1,..,tm]; dim=Name(k->j)@Name(k), {ensureShare=(on,off)})

TOOL Object Info

getobjinfo syntax:

getobjinfo (A[r,s,t], $infoVar; info=sequenceStart, dim=time)

where common info parameter values are: sequenceName, sequenceStart, sequenceEnd, sequenceStep, rank

Example:

integer $timeStart, $timeEnd, $targetYear
getobjinfo (population[uss,ts], $timeStart; dim=time, info=sequenceStart)
getobjinfo (population[uss,ts], $timeEnd; dim=time, info=sequenceEnd)
getobjinfo (targetYear[], $targetYear; info=dataElement, default=2041)

TOOL Variables

Variable declaration syntax and example:

varType $var1Name, $var2Name, ...
integer $x, $y, $z

Variable types: integer, real, boolean, string

TOOL operators by order of precedence:

* /
+ -
> < >= <=
== !=
AND OR
assign

Object Display

display() examples:

table() examples:

table (population[s,t,a], births[s,t,ma]; window1=1)

graph() examples:

geomap() examples:

Views & Scenarios

Structure of views.samm file, and types of views: creview, disview

!type    view name   node        v. link file  tool file     view description
creview  creFertScn  population  creFertScn.v  creFertScn.t  "create fertility scenario"
disview  popRpt      population  popRpt.v      popRpt.t      "Population Report"
fbview   trackEU     compare     trackEU.v     trackEU.t     "Tracking Energy Use"  20  0.001

Structure of variable link file (.v) for disview is:

...
varName
...

where varName takes the form calculatorName/varName for non-framework variables. For creview the file has the structure:

...
varName {U F}
...

where U is for Using type object and F is for Filling type objects.

Object array declarations in views objectType objectArrayName[][]
where objectTypes are: view, creview, localview

Reserved TOOL variables: $numScns, $numVars, $scnNumbers[], $scnNames[], $scnColours[], $scnDescs[], $createView, $history, $background

quit() is called as quit (return code)

tutorials/tool_quick_reference_card.txt · Last modified: 2020/09/08 16:12 by marcus.williams